K-Serisi

0216 326 45 35 mtg@megatr.com

K-Serisi

	System Model		EMK0301	EMK0622 **	EMK0801 **	EMK1251 **
System Specifications	Frequency Range(Hz)		0-3000	0-2500	0-2500	0-2500
	Rated Force	Sine(kN)	30.8	61.7	80	100
		Random (kN rms)*1	21.5	61.7	80	100
		Shock(kN)	61.6	123.4	160	200
	Maximum Acc.	Sine(m/s2)	1000	1000	1000	1000
		Random (m/s2 rms)	557	700	700	700
		Shock (m/s2 peak)	2000	2000	2000	2000
	Maximum Vel.	Sine(m/s)*3	1.8	2.0	2.0	2.0
		Shock (m/s peak)	1.8	2.0	2.0	2.0
	Maximum Dsp.	Sine (mmp-p)	51	51	51	51
		Maximum Travel  (mmp-p)	58	60	59	62
	Maximum Load(kg)		500	1000	1000	2000
	Power Requirements (kVA) *2		49	87	100	150
	Breaker Capacity (A) *4		175	350	350	600
Vibration Generatoer	Model		K030	K060	K080	K125
	Armature Mass(kg)		27	40	60	80
	Armature Diameter (φmm)		320	400	446	560
	Allowable Eccentric Moment(N･m)		980	980	1550	2450
	Dimensions(mm) W×H×D		1100x 1090x  824	1380x 1085x  1000	1595x 1050x  1200	1776x 1373x  1300
	Shaker Body Diameter(mm)		760	900	1000	1100
	Mass(kg)		3000	3700	5000	7000
Power Amplifier	Model		EM4MM -K30	EM8MM -K60	EM14HM -K80	EM18HM -K125
	Maximum Output (kVA)		33	60	100	98
	Dimensions(mm) W×H×D		580x 1950x  850	1160x 1950x  850	1740x 1950x  850	1740x 1950x  850
	Mass(kg)		950	1350	1500	2500
Controller	Vibration Controller		See Vibration Controller K2
Cooling	Cooling Method		Shaker:Water Cooling/Amp:Air Cooling
	Primary Cooling Water Supply (ℓ/min)		195	260	390	390
	Heat Exchanger	Dimensions (mm)  W×H×D	580x 1700x  850	580x 1700x  850	580x 1700x  850	580x 1700x  850
		Mass(kg)	400	400	400	400

	System Model		EMK1252 **	EMK1255 **	EMK1256 **	EMK2001 **	EMK2002 **
System Specifications	Frequency Range(Hz)		0-2500	0-2000	0-2000	0-2000	0-2000
	Rated Force	Sine(kN)	125	100	125	160	200
		Random (kN rms)*1	125	100	125	160	200
		Shock(kN)	250	200	250	320	400
	Maximum Acc.	Sine(m/s2)	1000	1000	1000	800	1000
		Random (m/s2 rms)	700	700	700	560	700
		Shock (m/s2 peak)	2000	2000	2000	1600	2000
	Maximum Vel.	Sine(m/s)*3	2.0	2.0	2.0	2.0	2.0
		Shock (m/s peak)	2.0	2.0	2.0	2.4	2.4
	Maximum Dsp.	Sine (mmp-p)	51	100	100	76.2	76.2
		Maximum Travel  (mmp-p)	62	132	132	86	86
	Maximum Load(kg)		2000	2000	2000	2000	2000
	Power Requirements (kVA) *2		170	170	190	270	300
	Breaker Capacity (kVA) *4		600	600	700	-	-
Vibration Generatoer	Model		K125	K125LS	K125LS	K200	K200
	Armature Mass(kg)		80	100	100	200	200
	Armature Diameter (φmm)		560	560	560	650	650
	Allowable Eccentric Moment(N･m)		2450	2450	2450	4900	4900
	Dimensions(mm) W×H×D		1776x 1373x  1300	1990x 1546x  1370	1990x 1546x  1370	2465x 1908x  1740	2465x 1908x  1740
	Shaker Body Diameter(mm)		1100	1100	1100	1260	1260
	Mass(kg)		7000	8000	8000	16000	16000
Power Amplifier	Model		EM22HM -K125	EM22HM- K125LS	EM27HM- K125LS	EM26HM -K200	EM32HM -K200
	Maximum Output (kVA)		124	124	155	256	320
	Dimensions(mm) W×H×D		2320x 1950x  850	2320x 1950x  850	2900x 1950x  850	3480x 1950x  850	3480x 1950x  850
	Mass(kg)		2600	2650	3350	4850	5000
Controller	Vibration Controller		See Vibration Controller K2
Cooling	Cooling Method		Shaker:Water Cooling/Amp:Air Cooling
	Primary Cooling Water Supply (ℓ/min)		390	390	390	650*5	650*5
	Heat Exchanger	Dimensions (mm)  W×H×D	580x 1700x  850	580ｘ 1700ｘ  850	580ｘ 1700ｘ  850	1050x 1900x  800	1050x 1900x  800
		Mass(kg)	400	400	400	600	600

• *1 Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
• *2 Power supply: 3-phase 200/220/380/400/415V, 50/60 Hz. A transformer is required for other supply voltages.
• *3 If the tests (Sweep or Spot) include high velocity, the maximum velocity value should be reduced to 1.4 m/s.
• *4 In case of 200 V
• *5 Bypass circuit is needed. Please contact IMV or your local distributor for further information.

• * The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure.
• * In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.
• * Frequency range values vary according to sensor and vibration controller.
• * Mass and dimensions may change for CE-marked systems.
• ** E/L is required for exporting the shaker system of over 50 kN Sine force.