i-Serisi

0216 326 45 35 mtg@megatr.com

i-Serisi

	System Model		EM2201	EM2301	EM2401	EM2501	EM2502	EM2601 **
System Specifications	Frequency Range(Hz)		0-3300	0-3000	0-2600	0-2500	0-2500	0-2600*4
	Rated Force	Sine(kN)	8	16	24	32	40	54
		Random (kN rms)*1	8	16	24	32	40	54
		Shock(kN)	16	32	48	64	80	108
		High Velocity Shock(kN)	10	23	36	49	63	90
	Maximum Acc.	Sine(m/s2)	1250	1250	1200	914	1142	1000
		Random (m/s 2 rms)	875	875	840	640	800	700
		Shock (m/s 2peak)	2500	2500	2400	1828	2284	2000
		High Velocity Shock (m/s 2peak)	1562	1796	1800	1400	1800	1666
	Maximum Vel.	Sine(m/s)	2.2	2.2	2.2	2.2	2.2	2.2
		Shock (m/s peak)	2.2	2.2	2.2	2.2	2.2	2.2
		High Velocity Shock (m/s peak)	3.5	3.5	3.5	3.5	3.5	3.5
	Maximum Dsp.	Sine(mmp-p)	51	51	51	51	51	51
		Max. Travel (mmp-p)	60	64	68	68	68	64
	Maximum Load(kg)		200	300	400	600	600	1000
	Power Requirements (kVA) *2		16.4	26	36	51	57	83
	Breaker Capacity (A) *3		60	100	125	200	200	300
Vibration Generator	Model		i220	i230	i240	i250	i250	i260
	Armature Mass(kg)		6.4	12.8	20	35	35	54
	Armature Diameter (φmm)		190	200	290	440	440	446
	Allowable Eccentric Moment(N･m)		294	700	850	1550	1550	1550
	Dimensions(mm) WxHxD		1020x 903x  550	1124x 957x  860	1234x 997x  890	1463x 1187x  1100	1463x 1187x  1100	1527x 1198x  1100
	Shaker Body Diameter(mm)		550	630	720	860	860	920
	Mass(kg)		900	1500	2000	3000	3000	3500
Power Amplifier	Model		SA1M- i20EM	SA2M- i30EM	SA3M- i40EM	SA4M- i50EM	SA5M- i50EM	SA7M- i60EM
	Maximum Output(kVA)		10	20	29	40	50	64
	Dimensions(mm) W×H×D		580x 1750x 850	580x 1750x 850	580x 1750x 850	580x 1950x 850	580x 2100x 850	1160x 1950x 850
	Mass(kg)		330	350	460	900	930	1400
Controller	Vibration Controller		See Vibration Controller K2
Cooling	Cooling Method		Air cooling
	Blower	Dimensions (mm)WxHxD*5	492x 1128x 625	708x 1421x 782	707x 1531x 917	1294x 2123x 838	1294x 2123x 838	1298x 2244x 798
		Mass(kg)	70	140	215	292	292	305
		Wattage(kw)	1.5	3.7	5.5	11	11	15
		Duct Hose Diameter(φ)	125	200	200	250	250	250

• *1 Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
• *2 Power supply: 3-phase 200/220/380/400/415V, 50/60 Hz. A transformer is required for other supply voltages.
• *3 In case of 200 V
• *4 Above 2000 Hz, the force rolls-of f at a rate of -12 dB/oct.
• *5 Spec described above is in case of 60Hz. Dimension is changed in case of 50Hz.

• * The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure.
• * In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.
• * Frequency range values vary according to sensor and vibration controller.
• * Mass and dimensions may change for CE-marked systems.
• ** E/L is required for exporting the shaker system of over 50 kN Sine force.